|
|
|
|
| Für deutsche Version hier klicken |
|
 |
|
|
|
|
» Components » Light-weight tubing
|
|
|
|
.: High strength super light-weight tubing |
|
 Finsterwalder is famous for a large selection of high strength super light-weight tubing from special aluminium alloys unavailable elsewhere. The tubing is also used for sport aviation purposes. We should like to draw attention to the fact, that each individual tube should be specially tested when used in safety critical situations.
|
|
|
In Finsterwalder gliders you will exclusively find tested tubings made from alloy 7075 (Perunal)!
|
|
|
» Info Alu-alloys...
|
|
|
Sail batten-/blindman's stick tubes alloy 7075 T6:
|
|
|
Article
|
|
mi*
|
€(/m)
|
| A10 |
Saw cut, per cut |
- |
0,30 |
| R12/0,45 |
12 x 0,45, unanodised, 46 g/m, Perunal F = 60, L = 4,8 m |
273 |
5,25 |
| R12/0,45E |
12 x 0,45, anodised, 46 g/m, Perunal F = 60, L = 2,4 m |
273 |
7,30 |
| R13 |
13,3 x 0,6, unanodised, 67 g/m, Perunal F = 60, L = 4,8 m |
484 |
6,00 |
| R13E |
13,3 x 0,6, anodised, 67 g/m, Perunal F = 60, L = 2,4 m |
484 |
7,05 |
| R17 |
17,3 x 0,6, unanodised, 87 g/m, Avional F = 38, L = 6 m |
1099 |
9,20 |
| R17E |
17,3 x 0,6, anodised, 87 g/m, Avional F = 38, L = 6 m |
1099 |
10,25 |
|
|
|
Prices for larger quantities see manufacturer price list!
|
|
|
Tubes:
|
|
|
Article
|
|
mi*
|
€(/m)
|
| A10 |
Saw cut, per cut |
- |
0,30 |
| R22E |
21,9 x 0,9, 150 g/m, AlZn4,5Mn F = 38, L = 5 m |
2660 |
7,70 |
| R22/0,4EP |
22 x 0,45, anodised, 85 g/m, Perunal F = 60, L = 4,75 m |
1770 |
15,50 |
| R25/2E |
25 x 2,0, anodised, 405 g/m, Avional F = 38, L = 6,58 m |
9445 |
17,50 |
| R28 |
28,5 x 1,7, unanodised, 400 g/m, Avional F = 38, L = 6,58 m |
12902 |
19,30 |
| R28E |
28,5 x 1,7, anodised, 400 g/m, Avional F = 38, L = 6,58 m |
12902 |
21,10 |
| R28P |
28,5 x 1,7, poliert, 400 g/m, Avional F = 38, L = 1,65 m |
12902 |
16,60 |
| R32/0,9 |
32,4 x 0,9, unanodised, 234 g/m, Avional F = 38, L = 6 m |
11056 |
10,00 |
| R32/0,9E |
32,4 x 0,9, anodised, 234 g/m, Avional F = 38, L = 6 m |
11056 |
11,80 |
| R32/0,9PE |
32,4 x 0,9, polished-anodised, 234 g/m, Avional F = 38, L = 2 m |
11056 |
14,00 |
| R44E |
43,8 x 0,9, anodised, 340 g/m, Perunal F = 60, L = 1-3,8 m |
27917 |
34,00 |
| R45 |
45,6 x 0,85, unanodised, 330 g/m, Perunal F = 60, L = 6 m |
29923 |
35,00 |
| R45E |
45,6 x 0,85, anodised, 330 g/m, Perunal F = 60, L = 6 m |
29923 |
37,00 |
| R45PE |
45,6 x 0,8, polished-anodised, 330 g/m, Perunal F = 60, L = 2 m |
29923 |
41,00 |
| R47 |
47,3 x 0,8, unanodised, 330 g/m, Perunal F = 60, L = 5,75 m |
31596 |
36,00 |
| R47PE |
47,3 x 0,8, polished-anodised, 330 g/m, Perunal F = 60, L = 2 m |
31596 |
42,00 |
| R47/0,65 |
47,3 x 0,65, unanodised, 265 g/m, Perunal F = 60, L = 1,91 m |
25752 |
19,90 |
| R52 |
52 x 0,9, unanodised, 390 g/m, Perunal F = 60, L = 5,8 m |
47173 |
39,50 |
| R52PE |
52 x 0,9, polished-anodised, 390 g/m, Perunal F = 60, L = 1,92 m |
47173 |
45,50 |
| R54 |
54 x 0,9, unanodised, 420 g/m, Perunal F = 60, L = 5,9 m |
52931 |
41,50 |
| R54PE |
54 x 0,9, polished-anodised, 420 g/m, Perunal F = 60, L = 1,92/2,05 m |
52931 |
47,50 |
| R60 |
60 x 0,9, unanodised, 470 g/m, Perunal F = 60, L = 6,01 m |
72974 |
47,50 |
| R60PE |
60 x 0,9, polished-anodised, 470 g/m, Perunal F = 60, L = ca. 2 m |
72974 |
54,00 |
| R62 |
62 x 0,9, unanodised, 485 g/m, Perunal F = 60, L = 6,01 m |
80634 |
49,50 |
| R62PE |
62 x 0,9, polished-anodised, 485 g/m, Perunal F = 60, L = 2 m |
80634 |
56,00 |
|
|
|
Prices for larger quantities see manufacturer price list!
|
|
 |
|
|
Abreviations:
|
|
L =
|
Length of uncut tube (minimum order)
|
|
54 x 0,9 =
|
Outer-Ø 54 mm, wall thickness 0,9 mm
|
|
F =
|
Tensile and compression strength per mm² (is also the measurement for bending)
|
|
|
|
mi* =
|
Moment of inertia: Information about the rigidity and compression stability of the tube. Is for all practical purposes independant of the alloy type and tensile strength.
|
|
|
|
Please note,
that the tubes are usually available only in the length stated below. Other lengths are sometimes available, however the delivery times are usually very long.
Tubes over 2 m length sometimes cause high packing and shippping costs. If desired we will cut the tubing for you at the nominal cost of € 0,30 per cut. We must also charge for unusable off cuts. The minimum order is 1 tube. We have no off cuts resulting from our glider production.
For purchase over € 500,-- in value per tube measurement, we are able to offer discount. Please call us and ask for a quote.
When picking up orders, please give us one day's notice.
|
|
|
|
 |
|
|
Tubing accessories: KS... KK... KSLS12 KSLE12 KSLE06 Se22 KSLE16 KSLS16
|
|
|
Article
|
|
€
|
| KK18-25 |
Tube end caps for inner-Ø 18, 20, 25 mm |
0,60 |
| KK36-58 |
Tube end caps for inner-Ø 36, 38, 44, 48, 50, 58 mm |
1,45 |
| KS... |
Saddle parts Ø x suitable tube-Ø
26 x 32-38, 32 x 38-45, 38 x 45-62, 45 x 50-60 mm |
1,30 |
| Ha72/1 |
Joint plate 3 mm Avional, length 88 mm, rounded edges and shone |
5,50 |
| KSLS/KSLE |
Tips/ends for sail battens, inner-Ø 11, 12, 16 mm |
1,30 |
| SE22 |
Adapter for batten inner-Ø 11 mm, to fibre glass bar 6 mm |
0,80 |
| KA36-50 |
Tube stiffing discs Ø 38, 42, 50 mm |
1,45 |
| KD... |
Detent button insert for inner Ø 44 or 50 mm |
1,45 |
| Be59 |
Detent button with stainless-steel spring |
1,45 |
| Ha08 |
Tube adapter joint for tube inner Ø 50 or 60 mm |
8,20 |
|
|
|
Prices for larger quantities see manufacturer price list!
|
|
|
| Disclaimer |
|
